When you have a web site or perhaps an application, pace is essential. The speedier your website works and then the faster your web applications work, the better for you. Given that a website is only a range of data files that communicate with one another, the devices that store and work with these files play an important role in site effectiveness.

Hard drives, or HDDs, have been, right until the past several years, the most efficient products for keeping data. Then again, lately solid–state drives, or SSDs, have already been gaining popularity. Check out our comparability chart to check out if HDDs or SSDs are more suitable for you.

1. Access Time

Image

After the release of SSD drives, data accessibility speeds are now over the top. Because of the completely new electronic interfaces employed in SSD drives, the normal data file access time has been reduced into a all–time low of 0.1millisecond.

Image

HDD drives count on spinning disks for files storage applications. Every time a file will be utilized, you will have to wait around for the correct disk to get to the right position for the laser to reach the data file in question. This results in a common access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

With thanks to the same radical technique allowing for quicker access times, you too can take pleasure in improved I/O efficiency with SSD drives. They can perform twice as many operations during a specific time in comparison to an HDD drive.

An SSD can handle at the very least 6000 IO’s per second.

Image

Hard drives present slower file access rates due to aging file storage and accessibility technology they’re employing. In addition, they display considerably sluggish random I/O performance as compared to SSD drives.

For the duration of our trials, HDD drives handled typically 400 IO operations per second.

3. Reliability

Image

SSD drives lack any kind of rotating elements, which means that there is significantly less machinery in them. And the less actually moving components you will discover, the lower the likelihood of failure can be.

The average rate of failure of any SSD drive is 0.5%.

Image

For the HDD drive to operate, it has to spin a couple of metallic hard disks at over 7200 rpm, keeping them magnetically stable in mid–air. They have a whole lot of moving parts, motors, magnets as well as other gadgets jammed in a tiny place. Hence it’s no surprise the common rate of failure of the HDD drive ranges between 2% and 5%.

4. Energy Conservation

Image

SSD drives function practically noiselessly; they don’t generate surplus heat; they don’t call for extra cooling solutions and also consume far less power.

Lab tests have revealed the average electrical power intake of an SSD drive is somewhere between 2 and 5 watts.

Image

HDD drives are renowned for being noisy. They need extra electrical power for cooling applications. On a hosting server containing a number of HDDs running continually, you need a great number of fans to keep them kept cool – this makes them a lot less energy–economical than SSD drives.

HDDs consume between 6 and 15 watts.

5. CPU Power

Image

SSD drives allow for better data file accessibility rates, that, subsequently, permit the CPU to perform data queries considerably faster and afterwards to go back to different duties.

The typical I/O hold out for SSD drives is 1%.

Image

When you use an HDD, you need to devote time anticipating the results of your data query. Consequently the CPU will remain idle for extra time, looking forward to the HDD to reply.

The regular I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

Image

In the real world, SSDs carry out as wonderfully as they managed in the course of our checks. We ran an entire system back up on one of the production servers. All through the backup operation, the common service time for any I/O demands was in fact under 20 ms.

Image

Using the same hosting server, however, this time built with HDDs, the end results were totally different. The average service time for an I/O request fluctuated between 400 and 500 ms.

7. Backup Rates

Image

Speaking about back ups and SSDs – we have noticed an effective enhancement with the data backup rate as we switched to SSDs. Now, a standard web server back up can take solely 6 hours.

Image

We utilized HDDs exclusively for lots of years and we have excellent familiarity with just how an HDD performs. Creating a backup for a hosting server designed with HDD drives can take around 20 to 24 hours.

Should you want to quickly improve the overall overall performance of your web sites with no need to modify any kind of code, an SSD–powered hosting solution is really a really good solution. Have a look at FSWH’s Linux cloud plans – these hosting services offer really fast SSD drives and are offered at affordable prices.


  • Service guarantees

  •  
  • Sign up today. There are no installation charges and you’ll have total SSH/full root access to your server. 99.9% network availability is warranted.
  • Compare our prices

  •  
  • Examine the resources and parameters offered by FSWH’s Virtual Private Servers. You can start with a smaller VPS Web Hosting server and upgrade with a mouse click as your demands expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • You can easily get in contact with us day and night by email or by utilizing our super–fast ticketing system. We provide a 1–hour reply–back time frame guarantee.